(Español) GMLib – Google Maps Library (en)

 Add comments
 

Sorry, this entry is only available in European Spanish.

  226 Responses to “(Español) GMLib – Google Maps Library (en)”

  1. odissey says:
    Tuesday June 25th, 2013 at 03:01 PM

    Would you please upload compiled GMap demos.

    Reply
  2. Luciano Fontes says:
    Friday November 22nd, 2013 at 10:00 PM

    Great work!

    I tried to install in XE5 but fails. Do you have plans to port? Thanks!

    Reply
  3. Petr says:
    Monday January 6th, 2014 at 01:12 PM

    Hi, PERFECT ans usefull component !
    Only one note – I use GMMarker (MarkerType=mtStyledMarker, StyledMarker.StyledIcon=siBubble). Is any way how to solve two markers at the same position (to be both visible) ? Can I define, which marker is visible “in the foreground” ? Now the bubble is on the top-right side from its coordinates, please, is possible to add new property of StyledMarker, which will define the bubble position from its coordinates (e.g. bpTopRight, bpBottomRight, bpBottomLeft, bpTopLeft) ? Than I can do two Markets (with fifferent text and color) at the same position and both visible (no overlay) … PLEASE, is possible to do it ???
    Thx for answer and Regards.

    Reply
  4. Magno Lima says:
    Tuesday February 18th, 2014 at 10:02 PM

    Hi! I am facing an weird problem, maybe my fault. I try to plan a direction from point A to B, using Google Map site it will route accordingly, but when I try using the lib we get dsINVALID_REQUEST on a specific segment, others will work very fine. Is something else I should care?

    Reply
  5. Carsten Goellner says:
    Monday March 31st, 2014 at 05:17 PM

    Hi cadetill,
    After having a first look at your components I was very impressed about its functions and features. Unfortunately I am now facing a problem using your lib in my office where the traffic goes through a proxy server. I tried to find out what to adjust in the properties but did not find any hint of proxy support. Can you please help me with this specific problem?

    Reply
  6. Rob Kelly says:
    Thursday May 8th, 2014 at 07:41 AM

    Hi Cadetill,

    I am utilising the ‘OnKeyDown’ event of the form (KeyPreview is enabled) to trap the keyboard ‘Delete’ key. However if i click anywhere on the map and then press Delete the OnKeyDown handler is not called. Any ideas?

    Thanks

    Reply
  7. David S says:
    Saturday June 21st, 2014 at 06:03 AM

    Hi, this looks like an excellent library. I was talking with a friend and we came up with an idea but not sure it is possible. From your knowledge of Google Maps, can you answer this question: given a GPS location (Lat/Lon?), can the program query the map or in some way find out if the given point is “on a roadway” or “on a feature”?

    Say you are driving down a road with GPS enabled. You can look at your device and see for yourself that you appear to be on a roadway on the map.

    But … can your application ask the map, “is this point on a roadway?” Perhaps, “does this point coincide with any known feature(s)? If so, what?”

    So if you come to an intersection, the program can analyze your route, know you’re on a road and see, for example, that the road to the right is a dead-end or turns into a dirt road and can warn you.

    It’s a simlar problem to knowing if a mouse cursor is over, say, a button. But you can map the cursor to the form and see if there’s an object below it. Can Google Maps tell you if there’s a road beneath the cursor (GPS point)?

    Thanks!

    Reply
  8. Stan says:
    Tuesday July 22nd, 2014 at 04:25 PM

    Hi.

    Do you have some very simple demos of how to work out directions and distances travelled.
    The Demos are great, but I’m just a hobbyist, and working out all of your code is really difficult for me.
    Some simplified demos – 1 button – 2 edits (from, to) and a label to report miles (not KM) travelled would be fantastic.

    Many thanks in advance.

    Reply
  9. Dan says:
    Tuesday August 26th, 2014 at 02:53 PM

    Hi,

    Excellent library, shame about Google’s pricing policies.

    I have one problem. The first time I drag pegman onto the map (having moved it using GeoCode away from the default centre), it shows streetview at the default centre (GMMap.RequiredProp.Center.Lat/Lng). Doing it a second time works fine. When I drag pegman, I can very quickly see the correct streetview, then this is overlaid with the wrong one.

    My guess is that the streetview layer exists when the program starts, but is not visible. Dragging pegman makes it visible, which then provides the opportunity to close the layer. Dragging pegman a second time creates the layer at the correct position, then makes it visible.

    How do I show the correct position first time?

    Regards,

    Dan

    Reply
  10. Extensive Google Maps API Library For Delphi XE6 Firemonkey On Windows | Delphi XE5 XE6 XE7 Firemonkey, Delphi Android, Delphi IOS says:
    Tuesday September 2nd, 2014 at 07:29 AM

    […] Head over and check out the extensive documentation before downloading the Google Maps Library for F… […]

  11. mehmet akif başpinar says:
    Friday September 5th, 2014 at 08:11 AM

    Please XE7 mappp 🙂

    Reply
  12. Muhsane Temster says:
    Monday September 29th, 2014 at 12:29 PM

    What is date new(XE7) versiyon.

    Reply
  13. lulei says:
    Saturday October 11th, 2014 at 09:31 AM

    hello
    I put the control under the Xe6 installation is successful. Open the procedure in the demo, compile successfully, but the map shows don’t come out, need APIkey? How to operate, please help. Thank you very much

    Reply
    • cadetill says:
      Saturday October 11th, 2014 at 11:57 PM

      Hi

      which demo do you open? What’s the error? API Key is not necessary

      Regards

      Reply
      • 李 says:
        Sunday October 12th, 2014 at 09:30 AM

        Hello,
        this is GMInfoWindow open error:’41380908’is not a vaild floating point value, and AfterPageLoaded fired – first page tip: loaded. Google map can be opened, Chinese URL: http://ditu.google.cn/maps? Output=classic&dg=ctry. How to operate, please help?. Thank you very much

        Reply
        • cadetill says:
          Sunday October 12th, 2014 at 06:17 PM

          Hi

          Send me a demo program with the error because I don’t understand your problem

          Thanks

          Reply
          • 李 says:
            Monday October 13th, 2014 at 01:49 AM

            Hello.
            1 Open the project “GMInfoWin_Demo.dproj”
            2.Select package (doble click) “GMInfoWin_Demo.dproj”
            3 Right click on “GMInfoWin_Demo.dproj” and click “Compile”, no error
            4 click on the “Run Without Debugging”.
            5 Tips: script error
            The line: 56
            Char:3
            Error: ‘Google’ is not defined
            Code: 0
            URL:about:blank
            Do you want to continue running the script on this interface
            Yes no
            Click “yes”
            6 error for “‘41380908’is not a vaild floating point value”, whether it is calling the Google map web site, Chinese URL: http://ditu.google.cn/maps? Output=classic&dg=ctry.
            How to operate, please help. Thank you very much, if it is convenient to add your Facebook account, convenient to ask you questions. Thanks a lot.

          • cadetill says:
            Monday October 13th, 2014 at 07:17 PM

            Hi again

            I have done steps 1 until 4 without any error. What do you want exactly? You can send me a email if you want.

            Regards

  14. jose carlos sanita says:
    Tuesday October 14th, 2014 at 03:49 PM

    Good Morning,
    I’m with problem started last night, the following error occurs

    “json” is not defined

    url: https://maps.gstatic.com/maps-api-v3/api/js/18/8/intl/pt_br/widgets.js

    someone could help me …

    att
    josé carlos

    Reply
  15. NeoGetz says:
    Tuesday October 14th, 2014 at 07:08 PM

    Hello,
    I’m using your library for a year now, without any problem, but today I’ve faced an issue with the InfoWindow. When I try to use them, I receive ‘JSON’ is undefined, and script error in https://maps.gstatic.com/maps-api-v3/api/js/18/8/intl/hu_ALL/widgets.js at line 0, and error messages like this pop up. Could you check your GMInfoWindow demo? It produces the same errors.

    Thanks,
    Neo

    Reply
  16. jose carlos says:
    Wednesday October 15th, 2014 at 12:32 AM

    Good night,

    When you hover over a point marked

    Yesterday started giving this error:

    Line: 188
    Character: 942
    Error: “JSON” is not defined
    Code: 0
    Url: about blank

    I wonder what is wrong

    I thank your attention

    Reply
  17. 李 says:
    Friday October 17th, 2014 at 10:49 AM

    Hello:
    Use Xe6 to open ‘GMInfoWin_Demo’ project, compile successfully, but the map loading out. Your program has no errors. You are using which one Google map. Google map web site you visit China: http://ditu.google.cn/maps? Output=classic&dg=ctry, you can open the access. I can modify the Google maps in the program’s Web site? If I can, I how to modify.
    Thank you very much

    Reply
  18. 葛 says:
    Monday October 20th, 2014 at 03:54 PM

    I tried to install in “c++ builder 2007” but fails. Who can help me ? Thanks!

    Reply
  19. Pepa says:
    Wednesday October 22nd, 2014 at 11:38 AM

    Hi. Nice, good job! I need this for HTML5 Builder. You consult me, please? Thank You. Pepa

    Reply
  20. Saidamin says:
    Thursday November 6th, 2014 at 06:57 PM

    Thank you for a great job.
    I tried to use your library, it works well, but I did not found any information on how to use KML layer.
    I see that TGMMap’s Layers property has KML, I tried to set different values and include kml link to file under URL property, but, kml layer did not shown. Any idea on how to use/show kml file on map.
    Thank you

    Reply
  21. Gizmo says:
    Saturday February 7th, 2015 at 02:29 PM

    Helo
    I try to use your component in delphi 7 to find list 600 adres.
    first 200 is OK but leter search works wrong. 100 list adreses 30 is OK.
    How good look 600 adress in the loop in delphi 7.
    Please Give me an example code.

    Best Regards
    Gizmo

    Reply
  22. Flavius says:
    Tuesday March 3rd, 2015 at 06:42 PM

    Hi!

    Do you think your maps would work with Turbo Delphi Professional 2006?

    Thanks

    Reply
  23. Moharram says:
    Sunday April 26th, 2015 at 02:48 PM

    Great work!!!

    i have a question. how can i download maps and use the programm in offline mode.

    regards

    Reply
  24. Artur_Indio says:
    Tuesday May 19th, 2015 at 11:16 PM

    Dear Cadetill,

    gmlib it’s a great work, congratulations. I have the follows questions, how to get my location using some gmlib component? Is it possible get LatLong based on my Ip Adress like Google Maps do using html5?

    Reply
  25. Hrvoje says:
    Saturday June 13th, 2015 at 09:35 AM

    Hi,
    Thank you for great components, it is a pleasure to use them.

    I have one question…
    Is it possible to calculate arrival time based on traffic in requested moment,
    after you enter, orgin adress, destination adress?

    Thx, H

    Reply
  26. Ruslan says:
    Wednesday July 8th, 2015 at 07:53 AM

    Very interesting project. But there are some kind of bug.
    I use Delphi 7.
    Here my code:

    procedure TForm1.BuDoClick(Sender: TObject);
    var
    i,j: Integer;
    begin
    GMGeoCode1.Marker.Clear;
    GMGeoCode1.Geocode(EdAdress.Text);
    if GMGeoCode1.GeoStatus = gsWithoutState then
    Exit;
    if GMGeoCode1.Count = 0 then
    begin
    ShowMessage('Can't find adress');
    end
    else
    begin
    for i := 0 to GMGeoCode1.Count-1 do
    begin
    GMGeoCode1.Marker.Add(GMGeoCode1.GeoResult[i].Geometry.Location.Lat,
    GMGeoCode1.GeoResult[i].Geometry.Location.Lng,
    GMGeoCode1.GeoResult[i].FormatedAddr);
    GMGeoCode1.Marker.Items[i].MarkerType := mtStandard;
    end;

    GMMap1.RequiredProp.Zoom := StrToInt(EdZoom.Text);
    GMMap1.RequiredProp.Center.Lat := RoundTo(GMGeoCode1.GeoResult[0].Geometry.Location.Lat,-6);
    j:=0; while j<10 do begin j:=j+1; Sleep(10); Application.ProcessMessages(); end; /// without this work wrong
    GMMap1.RequiredProp.Center.Lng := RoundTo(GMGeoCode1.GeoResult[0].Geometry.Location.Lng,-6);
    EdCoord.Text:=GMMap1.RequiredProp.Center.ToUrlValue;
    EdFullAdress.Text:=GMGeoCode1.GeoResult[0].FormatedAddr;
    end;
    end;

    Without string j:=0; while j<10 do begin j:=j+1; Sleep(10); Application.ProcessMessages(); end; program work wrong – it’s don’t show center of coordinates.

    Reply
    • cadetill says:
      Thursday July 9th, 2015 at 08:01 PM

      Hi

      You don’t need to create markers. If you set to True the GMGeoCode.PaintMarkerFound and you assign a TMarker object to the GMGeoCode.Marker property, then the markers are created automatically.

      To center map, use GMMap.SetCenter method or the CenterMapToMarker method of a particular Marker

      Regards

      Reply
  27. Dom says:
    Tuesday August 11th, 2015 at 10:23 PM

    Hi, can you show small example code to calculate distance between towns, thank you.

    Reply
  28. TWebBrowser Google Maps - Delphi-PRAXiS says:
    Thursday September 3rd, 2015 at 11:00 AM

    […] nicht diese sondern die Version. Alternative: http://sourceforge.net/projects/gmlibrary/ http://www.cadetill.com/gmlib_en/ Markus […]

  29. Juliomar Marchetti says:
    Wednesday October 7th, 2015 at 12:15 PM

    why not available via svn on sourceforge?
    it is best to update and maintain the sources !!!!

    Reply
  30. Thorsten says:
    Thursday October 8th, 2015 at 08:46 AM

    Hi !
    I just found the OSM after updating.
    It seems that the RequiredProp.MapType is not working for OSM.
    BTW: excellent work !

    Reply
  31. Flavius says:
    Friday October 9th, 2015 at 06:33 PM

    Hi!

    Awesome components! I need to display some boxes with text on a map, so I’m thinking 2 options:

    – GMInfoWindow: but is it possible to remove the “close window x button”? I don’t want the user to be able to close the InfoWin
    – GMMarker: how do I add text to the marker? I saw in your TGeometryClass demo that you were able to put numbers in the GMMarker. But this didn’t work for me, it still shows the classic marker with a black circle in the middle:

    GMMarker1.Items[0].Title:=’9′

    Thanks,
    Flavius

    Reply
  32. tormod skaret says:
    Tuesday January 12th, 2016 at 09:44 AM

    Do You have any intention to port this library to lazarus/FPC, there are a lot of us that can not afford buying Delphi for programming. FPC and Lazarus IDE are under continous development.

    tormod skaret

    Reply
  33. Jeter Rabelo Ferreira says:
    Thursday January 28th, 2016 at 10:59 PM

    Hello.

    I own a list of several lat / long. It has a way of informing the list and Maps draw me the path done?

    I tried once in GMDirections, but above an amount errors occurred.

    This list can contain tens, hundreds and even thousands of data.

    Thank’s and congratulations.
    Jéter

    Reply
  34. Szabo Ferenc says:
    Wednesday February 10th, 2016 at 08:11 AM

    Hi!

    For some reason does not work on Windows Xp, i get a script error, on Windows 7 everything works fine.
    How can i solve this problem?

    Best Regards,
    Fenyo

    Reply
  35. Dan Pearce says:
    Wednesday February 10th, 2016 at 12:21 PM

    Hi,

    Two questions, please.

    1. GM API is now on version 3.23, map.html references 3.17. How safe is it to update version number? Will you be updating gmlib to use newer APIs?

    https://developers.google.com/maps/documentation/javascript/releases

    2. I need to use weight with heatmaps (see http://blog.smartbear.com/web-monitoring/the-heat-is-on-a-simple-guide-to-creating-heatmaps/ for example). I cannot see support for this in gmlib, have I missed this or do you plan to implement this in a new version?

    Best regards,

    Dan

    Reply
    • cadetill says:
      Wednesday February 10th, 2016 at 04:56 PM

      Hi Dan

      1.- You only need to change version into html.map, recompile resources with rc.cmd bat file and rebuild components. GMLib isn’t tested with new features, is possible that don’t work

      2.- GMLib 1.x is closed. This new feature (and other) will be included into GMLib 2.x (all recoded).

      Regards

      Reply
  36. Johnny says:
    Sunday April 17th, 2016 at 09:33 AM

    Hola,

    May I ask for a little help please? When I display a route on a map like this …

    if not gmmap.Active then
    gmmap.Active := true;
    GMMap.SetCenter(myLat, myLng);
    GMMap.RequiredProp.Zoom := TrackBar1.Position;

    oAddr := mmoFrom.Lines.Text;
    oAddr := StringReplace(oAddr, #$D#$A, ”, [rfReplaceAll]);
    GMDirection.DirectionsRequest.Origin.Address := oAddr;

    dAddr := mmoTo.Lines.Text;
    dAddr := StringReplace(dAddr, #$D#$A, ”, [rfReplaceAll]);
    GMDirection.DirectionsRequest.Destination.Address := dAddr;

    GMDirection.Execute;

    All works well. However, if I change the destination address and call the same code again, the new route does display correctly, but the first route is still visible on the GMMap.

    May I ask, how do I clear the old route from the map ?

    Thank you for you time,
    John.

    Reply
  37. Alex says:
    Tuesday April 26th, 2016 at 11:15 AM

    Hi!
    Can you compile this Lib for Delphi 5??
    Thx

    Reply
  38. Bartek says:
    Tuesday May 3rd, 2016 at 08:15 PM

    Hi..

    Can you add support for 23 waypoints in direction calcualtion as described here https://developers.google.com/maps/documentation/directions/usage-limits when user add api key ?

    Reply
  39. Dan Pearce says:
    Thursday May 12th, 2016 at 07:30 AM

    You need to buy a key from Google, lowest cost of entry is $10,000 per year. It will be something like gme-yourcompanyname. You can put this in the GMMap.SPIKey field. Then check Resources\map.html in GMLib to ensure the javascript script specifies “&client=API_KEY” in the URL (it used to specify “&key=API_KEY”), recompiling if necessary.

    Reply
    • Bartek says:
      Thursday May 12th, 2016 at 08:58 AM

      Ok I will try. BTW key for 2500 requests/day for Google Maps Directions API is free. You can activate it here https://console.developers.google.com/apis/ after 2500 $0.50 USD / 1,000 additional requests, up to 100,000 daily

      Reply
    • Bartek says:
      Thursday May 12th, 2016 at 10:07 AM

      So after add GMMap.APIKey and change in map.html After TDirectionsRoute.Execute with 10 via points I get 1 in TDirectionsRoute.Count,but…TDirectionsRoute.DirectionsResult.Routes[0] is empty 🙁

      Reply
      • cadetill says:
        Thursday May 12th, 2016 at 11:11 AM

        Don’t changes any into map.html, only set GMMap.APIKey property

        Reply
        • Bartek says:
          Thursday May 12th, 2016 at 11:37 AM

          I set apikey,restore old map.html and still is the limit to 8 waypoints 🙁 With more the direction is not claculated

          Reply
          • Dan Pearce says:
            Thursday May 12th, 2016 at 11:52 AM

            I think we are not talking about the same things, Bartek.

            1. The reason we have a Google Maps for Work is that [we think] it is required for licencing reasons (i.e. using Google Maps from a Delphi application not a publicly accessible website. We sure didn’t want to shell out $10,000!

            2. The limit on waypoints, as cadetill has to point out more than he should, is a Google limit. Use the correct API key, and you get 25 waypoints.

            3. My comments about changing map.html may have referred to GMLib 1.5.0, not 1.5.3. Sorry if there is confusion about this, I did not record exactly what we had to change, by version.

            4. The link you provided (https://console.developers.google.com/apis/) I don’t recognise, we have our own Google for Work Support Portal. This may be your problem.

          • Bartek says:
            Thursday May 12th, 2016 at 03:33 PM

            This is my key AIzaSyDuLVE8Pi4yijEBuC7La0NY4ibrMtLmR7s – can You check it ? Is it working for you ?

          • Dan Pearce says:
            Thursday May 12th, 2016 at 03:45 PM

            That’s a key, the old [free] way of using Google Maps. Maybe it works, maybe not. We think using maps as a non-web application is outside the Google licence terms

            https://developers.google.com/maps/terms#9-license-requirements

            9.1 Free, Public Accessibility to Your Maps API Implementation.

            9.1.1 General Rules.

            Free access (no fees). Subject to Section 9.1.2 (Exceptions), your Maps API Implementation must be accessible to the general public without charge and must not require a fee-based subscription or other fee-based restricted access. This rule applies to Your Content and any other content in your Maps API Implementation, whether Your Content or the other content exists now or is added later.
            Public access (no firewall). Your Maps API Implementation must not operate (i) only behind a firewall; or (ii) only on an internal network (except during the development and testing phase); or (iii) in a closed community (for example, through invitation-only access).
            9.1.2 Exceptions.

            Enterprise agreement with Google. The rules in Section 9.1.1 (Free access, Public access) do not apply if you have entered into a separate written agreement with Google (such as a Google Maps for Work agreement) or obtained Google’s written permission.

        • Bartek says:
          Thursday May 12th, 2016 at 11:41 AM

          And the quota (usage) of Google Maps JavaScript API still 0 🙁

          Reply
  40. Hrvoje says:
    Thursday May 19th, 2016 at 10:47 AM

    Hi,

    is it possible to use AutoComplete editbox, and on click directly put in delphi compnent (edit box)?

    Thank you, hrvica

    Reply
  41. Mostafa says:
    Wednesday June 8th, 2016 at 02:10 PM

    Hi

    I have downloaded the GMLib components, however the main issue I have is searching for an address or postcode. It is not returning the correct result, or no results for post code search. How can we set the search filter types?

    For the search I am using

    GMGeocode1.Geocode(anAddress);

    Regards
    MM

    Reply
  42. Mostafa says:
    Thursday June 9th, 2016 at 11:34 AM

    when searching for example Heathrow, it return only one result which is not correct one and is very different to google search, also no post code search works. Is there a property to set filters “or set the filters to none” to return all results.

    Reply
  43. Mostafa says:
    Thursday June 9th, 2016 at 02:04 PM

    Hi

    Is it possible to implement the following function which will return search results?

    service.getPlacePredictions({ input: ‘Find_Me’ },
    function(predictions, status) {
    if(status==’OK’){
    for(var i=0;i< 5;++i){
    if(predictions[i]){
    (function(i){
    var n = document.getElementById('ol')
    .appendChild(document.createElement('li')),
    s = new google.maps.places
    .PlacesService(n.appendChild(document.createElement('div'))),
    p = predictions[i].description;

    s.getDetails({reference:predictions[i].reference},
    function(details,status){
    n.appendChild(document.createTextNode(p));
    n.appendChild(document.createElement('br'));
    n.appendChild(document.createTextNode(
    details.geometry.location.toString()));
    });
    })(i)
    }
    }
    }}
    );
    }

    Reply
  44. Thorsten says:
    Friday June 17th, 2016 at 06:44 AM

    Script error when using StyledMarker

    Hi,
    I just got a feedback that my software using GMLib 1.5.3 is not fully working any more. There is a script error when using StyledMarkers: “StyledIcon is not defined”.
    I found the same proble here, together with a possible solution:
    http://stackoverflow.com/questions/37673654/google-maps-styledmarker-no-longer-working
    But how can i fix this? Where do i have to copy the scriptfile to?

    On some computers, there is another Scripterror when there is no internet connection available: “Google is not defined”

    Any idea what’s wrong?

    Thanks
    Thorsten

    Reply
  45. Verney says:
    Wednesday June 22nd, 2016 at 05:24 AM

    Does FMX support android device? i tried it on XE7 , but not showing GMMap on android,

    Thank You

    Reply
  46. Stamatis says:
    Sunday June 26th, 2016 at 10:58 PM

    Hello,
    I’ve read that with the new release you have added support for FMX. Does that mean that we can use for android/ios or there is no support for those platforms?

    Reply
  47. Lee Parvin says:
    Friday July 1st, 2016 at 09:25 AM

    Hi there

    Is it possible to have a dotted/dashed line in DirectionsRender.PolylineOptions like in Polylines???

    Many thanks

    Lee

    Reply
  48. Rafal says:
    Friday July 1st, 2016 at 12:41 PM

    Will be a version for Delphi Berlin ?

    Reply
  49. Anita García says:
    Friday July 29th, 2016 at 01:28 AM

    Cual es el límite de polígonos que se pueden dibujar con GMLIB.

    Reply
  50. Mishutka_Sir says:
    Friday August 19th, 2016 at 12:22 PM

    Best regards from Russia. After installing the 1.5.3 to Berlin on the component palette in all 4 components. (TGMInfoWindow,TGMGeocode,TGMGroudOverlay,TGMHeatmap). How to install GMLib appeared to all the components in Berlin?

    Reply
  51. ray says:
    Thursday September 8th, 2016 at 10:13 AM

    Please let me know when realse GMLibray of RAD Studio Berlin 10.1

    Reply
  52. ATK says:
    Monday September 26th, 2016 at 10:11 PM

    Hi! Will be the version on RAD 10.1 Berlin for FMX?

    Reply
  53. John says:
    Friday November 4th, 2016 at 09:33 AM

    Hello,

    Thank you for your very good Component!!

    Is there a way to show the map in Greek Language? It shows greek and english.
    Also the translation is not working, selecting language to English, error messages apears in Spanish.

    Thanks
    John

    Reply
  54. Lee Parvin says:
    Friday November 18th, 2016 at 03:49 PM

    Hi there

    Im using the latest version and it has been working fine. However, it appears to have stopped working.

    Using the MegaDemo I get script error in http://maps.google.com/maps-api-v3/api/js/25/15/intl/en_gb/poly.js.

    Has Google updated the API’s?

    Many thanks

    Lee

    Reply
  55. Lee Parvin says:
    Monday November 21st, 2016 at 09:27 AM

    Hi there

    On further investigation the problem is with the IE version. To trigger the error you need to run the program with an older version of Internet Explorer eg IE Version 8.

    Running the program with say IE Version 11 works OK.

    Many thanks

    Lee

    Reply
  56. Cornestian Mircea says:
    Monday December 5th, 2016 at 12:51 PM

    on delphi seatlle 10
    I install gmlib v1.5.3.
    when i build demo project, work perfect
    when i build my project a have err:
    [dcc32 Error] WebControlVCL.pas(186): E2029 Identifier expected but ‘IMPLEMENTATION’ found
    [dcc32 Fatal Error] GMMapVCL.pas(335): F2063 Could not compile used unit ‘WebControlVCL.pas’

    Reply
  57. Bernard says:
    Thursday February 9th, 2017 at 01:47 PM

    Good morning,
    Est_il always possible to show the weather forecast (Weather in Gmap)
    If yes how, this does not work.
    Was told myself I that this function was obsolete, is that that’s true?
    Salutations

    Reply
  58. Tallys says:
    Monday February 27th, 2017 at 05:42 PM

    Hola cadetill! En primer lugar gracias por el gran componente! Estoy tratando de usarlo en Delphi Seattle FMX, pero no puedo. He instalado los paquetes como el archivo de instalación, pero no registra los componentes de FMX. No puedo encontrar componente GMMap. Él está trabajando correctamente para el FireMonkey?

    Agradezco desde ya,

    Gracias!

    PS Lo siento por el idioma, google translator

    Reply
  59. selahattin says:
    Thursday March 9th, 2017 at 11:20 PM

    Hello,
    I have an application with delphi. I used GMMAp1. The program was working but now “Oops! There was a problem. This page could not load Google Maps properly. I’m getting the message. Would you help me with the subject, please.

    Reply
    • cadetill says:
      Saturday March 11th, 2017 at 12:49 PM

      It seems they are making changes to the API and this do that GMLib stops running for some time. If the errors continue I will try to fix it

      Reply
      • selahattin says:
        Monday March 13th, 2017 at 10:52 PM

        hello,
        It still does not work, it gives the same error again.

        “Oops! Something went wrong.

        This page didn’t load Google Maps correctly. See the JavaScript console for technical details”

        Reply
      • Shaun Hirst says:
        Wednesday March 15th, 2017 at 08:42 PM

        I am seeing this error message as well, it has briefly started work again on and off.

        Currently its now working.

        Reply
      • selahattin says:
        Thursday June 22nd, 2017 at 11:51 PM

        Hello Cadetill,
        can you help me, please,

        I am writing the following code, but only the latest rote seems, I want to see all the roots.

        procedure TForm1.Button4Click(Sender: TObject);
        var
        i:integeR;
        begin
        GMMap1.DoMap;

        GMMarker1.Add;
        GMMarker1.Items[0].Position.Lat := 39.7589418925097;
        GMMarker1.Items[0].Position.Lng := 37.0511508733034;
        GMMarker1.Items[0].Title := ‘Orginal_Adress_0’;
        GMMarker1.Items[0].Draggable := true;
        GMMarker1.Items[0].Flat := true;

        GMMarker1.Add;
        GMMarker1.Items[1].Position.Lat := 39.7477962764368;
        GMMarker1.Items[1].Position.Lng := 37.0212382078171;
        GMMarker1.Items[1].Title := ‘Orginal_Adress_1’;
        GMMarker1.Items[1].Draggable := true;
        GMMarker1.Items[1].Flat := true;

        GMMarker1.Add;
        GMMarker1.Items[2].Position.Lat := 39.7488975147203;
        GMMarker1.Items[2].Position.Lng := 37.0168179273605;
        GMMarker1.Items[2].Title := ‘Orginal_Adress_2’;
        GMMarker1.Items[2].Draggable := true;
        GMMarker1.Items[2].Flat := true;

        GMMarker2.Add;
        GMMarker2.Items[0].Position.Lat := 39.7605073926379;
        GMMarker2.Items[0].Position.Lng := 37.0257704705;
        GMMarker2.Items[0].Title := ‘Destination_adress_0’;
        GMMarker2.Items[0].Draggable := true;
        GMMarker2.Items[0].Flat := true;

        GMMarker2.Add;
        GMMarker2.Items[1].Position.Lat := 39.744194444014;
        GMMarker2.Items[1].Position.Lng := 37.027212157845;
        GMMarker2.Items[1].Title := ‘Destination_adress_1’;
        GMMarker2.Items[1].Draggable := true;
        GMMarker2.Items[1].Flat := true;

        GMMarker2.Add;
        GMMarker2.Items[2].Position.Lat := 39.784194444014;
        GMMarker2.Items[2].Position.Lng := 37.027212157845;
        GMMarker2.Items[2].Title := ‘Destination_adress_2’;
        GMMarker2.Items[2].Draggable := true;
        GMMarker2.Items[2].Flat := true;

        for i := 0 to 2 do
        begin

        GMDirection1.DirectionsRequest.Origin.LatLng.Lat := GMMarker1.Items[i].Position.Lat;
        GMDirection1.DirectionsRequest.Origin.LatLng.Lng := GMMarker1.Items[i].Position.Lng;
        GMDirection1.DirectionsRequest.Destination.LatLng.Lat := GMMarker2.Items[i].Position.Lat;
        GMDirection1.DirectionsRequest.Destination.LatLng.Lng := GMMarker2.Items[i].Position.Lng;
        GMDirection1.Execute;

        end;

        end;

        Reply
    • dima says:
      Sunday March 12th, 2017 at 05:32 PM

      write your APIkey to GMMap properties

      Reply
    • dima says:
      Sunday March 12th, 2017 at 05:34 PM

      Enter your APIkey in the GMMap properties

      Reply
  60. Cihat BADUR says:
    Monday March 13th, 2017 at 07:14 PM

    Hello

    Firstly I want to say thanks to for this library, by the way I’m using your library on my project until today but I think google maps changed to something and I try to test it on your megademo the both are have same issues. The issue is about java script, the map open but when I try to move or zoom in map the map closed yourself and Google gives to me problem message that is ” This page couldn’t load the map successfully, Check to java script for technical details. If you help me I’ll be pleased, best regards

    Thanks.

    Reply
  61. jonsylvestre says:
    Monday March 13th, 2017 at 09:58 PM

    Get you API key from google and set the property of your TGMMap with your key.

    Also you have to do some modification in the map.html file and then rebuild the ressource with rc.cmd

    you need to have this line corrected to
    type=”text/javascript” src=”http://maps.google.com/maps/api/js?v=3.17&key=API_KEY&libraries=weather,panoramio,geometry,drawing,visualization”>

    also replace this line

    type=”text/javascript” src=”http://google-maps-utility-library-v3.googlecode.com/svn/trunk/styledmarker/src/StyledMarker.js”

    with this line

    type=”text/javascript” src=”https://cdn.rawgit.com/jacopotarantino/google-maps-utility-library-v3/master/styledmarker/src/StyledMarker.js”

    Reply
  62. selahattin says:
    Tuesday March 14th, 2017 at 06:44 PM

    hello cadetill,
    my project is not working, can you help me please ,

    “Oops! Something went wrong. This page didn’t load Google Maps correctly. See the JavaScript console for technical details”

    Reply
  63. dima says:
    Wednesday March 15th, 2017 at 02:07 PM

    version 1.5 final and your Google api key in working (sorry for my english)

    Reply
  64. sheti says:
    Wednesday March 15th, 2017 at 03:23 PM

    hello
    we have this problem too
    pleas help use

    “Oops! Something went wrong. This page didn’t load Google Maps correctly. See the JavaScript console for technical details”
    thanks for your help

    Reply
  65. selahattin says:
    Monday March 20th, 2017 at 07:54 PM

    Hello friends,
    I want you to see the names of all the markers on the map all the time, do you know the necessary code?

    Reply
  66. I Gde Agus Adika says:
    Wednesday March 29th, 2017 at 03:10 AM

    After install why google map could not show on TBrowser?

    Reply
  67. shetri says:
    Tuesday April 18th, 2017 at 08:45 AM

    hello cadetill,
    We want to rotate map.is this possible in gmlib?
    if possible how we can to do This?

    Reply
  68. Andrew says:
    Tuesday April 25th, 2017 at 01:19 PM

    Hello

    Using the MegaDemo I get script error in http://maps.google.com/maps-api-v3/api/js/25/15/intl/en_gb/poly.js.
    This is very similar to the post 54 by Lee Parvin.
    Link to solve this only in spanish.
    Could you explain in English how to solve this problem.

    Reply
  69. Marcio Eduardo D. dos Reis says:
    Thursday May 4th, 2017 at 11:15 PM

    Ola Cadetill

    Atualizei a ultima versão no git, porem esta agora ocorrendo erro ao tentar efetuar operações no mapa , na versao anterior funciona corretamente, na ultima não, até o Megademo tambem não esta funcionando , tente ir em uma TMarker e clicar no centermap ocorre o erro.

    Abaixo segue a linha do erro

    function TCustomGMMap.Check: Boolean;
    begin
    if not Assigned(FWebBrowser) then
    raise Exception.Create(GetTranslateText(‘No se ha especificado el objeto WebBrowser’, Language));

    if not FActive then
    raise Exception.Create(GetTranslateText(‘No está activo’, Language));

    if not FDocLoaded then
    raise Exception.Create(GetTranslateText(‘Página inicial aun no cargada’, Language)); <<<<<<<= O erro ocorre aqui , e sem tradução pois estou utilizando Portugues
    Result := not (csDesigning in ComponentState);
    end;

    Reply
  70. Marcio Eduardo D. dos Reis says:
    Thursday May 4th, 2017 at 11:17 PM

    Olá Cadetill

    Atualizei a ultima versão no git, porem esta agora ocorrendo erro ao tentar efetuar operações no mapa , na versao anterior funciona corretamente, na ultima não, até o Megademo tambem não esta funcionando , tente ir em uma TMarker e clicar no centermap ocorre o erro.

    Abaixo segue a linha do erro

    function TCustomGMMap.Check: Boolean;
    begin
    if not Assigned(FWebBrowser) then
    raise Exception.Create(GetTranslateText(‘No se ha especificado el objeto WebBrowser’, Language));

    if not FActive then
    raise Exception.Create(GetTranslateText(‘No está activo’, Language));

    if not FDocLoaded then
    raise Exception.Create(GetTranslateText(‘Página inicial aun no cargada’, Language)); < — O erro ocorre aqui , e sem tradução pois estou utilizando Portugues
    Result := not (csDesigning in ComponentState);
    end;

    Reply
    • Creed Lilly says:
      Wednesday May 17th, 2017 at 04:53 PM

      Hello cadetill,

      Is there any resolution to this issue? My customers and myself started getting this as of yesterday (16 May) when it had been working perfectly fine up to then. My customers have the release of GMLib which fixed the handling of the API Key but I pulled the latest code from GitHub yesterday and I still get the error.

      Reply
  71. Sergo says:
    Saturday May 13th, 2017 at 05:49 PM

    Hi Cadetill, I’m not fluent in English. So I apologize in advance for mistakes.
    I’m trying to understand your library. Library I liked. Many things I already have.
    Now, I have a problem with the route through the GMDirection two points.
    If possible, could you send a piece of code of this implementation?

    Reply
    • cadetill says:
      Saturday May 13th, 2017 at 11:59 PM

      send me your code by email 😉

      Reply
      • Sergo says:
        Sunday May 14th, 2017 at 09:18 AM

        I can calculate the distance between two points, but visually the route is not displayed
        procedure TForm1.Button2Click(Sender: TObject);
        var a,i,j,km : integer;
        begin
        if GMDirection1.DirectionsRequest.WaypointsList.Count 0 then
        GMDirection1.DirectionsRequest.WaypointsList.Clear;
        if GMDirection1.Count 0 then
        for i := 0 to GMDirection1.Count-1 do
        GMDirection1.Delete(i);
        GMDirection1.DirectionsRequest.Origin.Address:=sEdit1.Text;
        GMDirection1.DirectionsRequest.Destination.Address:=sEdit2.Text;
        GMDirection1.Execute;
        km:=0;
        with GMDirection1.DirectionsResult[0] do
        begin
        if TTransform.DirectionsStatusToStr(Status) = ‘dsOK’ then
        begin
        for j := 0 to Routes[0].CountLeg – 1 do
        km:=km+Routes[0].Leg[j].Distance.Value;
        end
        end;
        km:=km div 1000;
        sStatusBar1.Panels[4].Text:=inttostr(km)+’km’;
        end;

        Reply
  72. Matthias says:
    Tuesday May 16th, 2017 at 08:39 AM

    Hello Cadetill,

    we are using the latest version of the GMLib. Recently the markers aren’t depicted anymore on the map and the centering doesn’t work. Double clicking also doesn’t focus a marker. The code and program hasn’t been changed for over two years. Do you have any ideas what could be wrong?

    Thank you in advance for your help,

    Kind regards
    Matthias

    Reply
  73. Shetri says:
    Tuesday May 16th, 2017 at 10:01 AM

    hi
    in GMDirection unit

    thiere is a problem in this code when was no response never finished.

    ExecuteScript(‘GetDirections’, Params);

    repeat
    TGMGenFunc.ProcessMessages;
    until (GetIntegerField(DirectionsForm, DirectionsFormResponse) = 1);
    GetRetournedData;

    Reply
  74. Telecetera says:
    Tuesday May 16th, 2017 at 02:50 PM

    Hi, Cadetill,

    Big problems for us this morning, all our customers report “pagina inicial aun no cargada”.

    Our GMLib code (1.5.3, D2007) fails from today showing the error text in the title of this post. Nothing has changed, the error translates to “Home Page not uploaded”.

    Using Fiddler, we can see that GMLib now fails to load…

    http://gmlibrary.googlecode.com/svn/trunk/Resources/MaxZoom.js

    because it no longer exists. We cannot find this file. Logging in to our GM portal, we see…

    The GM Portal reports “The current Maps JavaScript API v3 experimental version (3.28) will become the release version on or shortly after May 16, 2017. Version 3.26 will be removed. Requests for 3.26 or any prior version will now be served version 3.27. Versioning documentation is available at: https://developers.google.com/maps/documentation/javascript/versions”

    …which surely must be more than a coincidence, today being the 16th May.

    In the meantime, we have downloaded and tested version 1.5.4, but the same happens. We note that there is a comment about this already (11 days old) here

    https://github.com/cadetill/gmlib_v1/issues

    Help, please!

    Reply
    • Telecetera says:
      Tuesday May 16th, 2017 at 04:49 PM

      I think the reference to MaxZoom.js is an error, we do not know how this came to be in map,html (having browsed the GitHub repository). We have gone back to ‘as doenloaded’ 1.5.3 and 1.5.4, the error remains the same. The changes we make from the downloaded code are two:

      One, in GMMapVCL.pas

      procedure TGMMap.LoadBlankPage;
      begin
      if not (FWebBrowser is TWebBrowser) then Exit;

      FDocLoaded := False;
      //TWebBrowser(FWebBrowser).Navigate(‘about:blank’);
      TWebBrowser(FWebBrowser).HandleNeeded;
      TWebBrowser(FWebBrowser).Navigate(‘http://teleceterahosted.co.uk’);
      end;

      Two, in map.html

      key=API_KEY -> client=API_KEY

      because we are using API for Business

      Reply
    • cadetill says:
      Wednesday May 17th, 2017 at 11:13 PM

      download latest version on github

      Reply
  75. Mykola says:
    Wednesday May 17th, 2017 at 08:55 AM

    Hello. I need your help plz. Map does not respond to the cursor movement and we can not move markers through the map. Also we get wrong position of InfoWindow for poliline. its goes to 0 coordinate.

    Reply
  76. Sergey says:
    Wednesday May 17th, 2017 at 02:25 PM

    I apologize in advance for my English.
    We have long used your component “gmlib 1.5.3” in your software. And for all the time of work there were no problems. But from today on the Google map, working through the component, icons and lines are no longer displayed.
    This problem can not be solved by changing the version of windows.
    We still can not understand why the objects on the map suddenly stopped showing up. Maybe you can advise us something to solve this problem.

    Reply
  77. Sergey says:
    Thursday May 18th, 2017 at 05:50 AM

    I installed the version of “1.5.4 Final”. I understand this is the latest version of the component. But unfortunately the problem remained. In my software, objects are created which when the application is launched are not visible on the map, and after the launch it is no longer possible to make them visible. As an experiment, I created a new project in which I created a visible object when I started it, the object was displayed, but it’s impossible to change its location by the event, which is very important. I have the impression that google company has forbidden to dynamically change the position of objects. What do you think about this?

    Reply
  78. Greg H. says:
    Thursday May 18th, 2017 at 10:30 PM

    Hi Cadetill,

    First of all. Excellent component! It has been proven to be very useful!

    Unfortunately, sometime very recently (probably the same time Google decided to push their new API version yesterday) the component stopped functioning for me. I believe I may be having the same issue as Sergey above. No markers or lines are being displayed. I was using version 1.5.3 up until today. I downloaded 1.5.5 today but that did not seem to fix the issue. Any advice you can offer would be very much appreciated!

    Reply
    • cadetill says:
      Thursday May 18th, 2017 at 11:11 PM

      first of all, uninstall GMLib, delete dcu and bpl files and reinstall GMLib. Let me know what happens after that

      Reply
      • Greg H. says:
        Friday May 19th, 2017 at 01:49 PM

        That fixed it. Thank you! I think the problem was that I neglected to update my library path after installing. I installed to new folder and updated paths. All is now well. I shall see if I can find a donation 🙂

        Reply
  79. Sergey says:
    Friday May 19th, 2017 at 07:16 AM

    Objects on the map are still not visible.
    A machine was chosen to find out the circumstances of the problem that occurred.
    1) A computer running Windows 7 is a professional with installed SP1
    2) Internet browser Internet Explorer 11.0.9600.17843
    3) In the system registry in the “HKEY_CURRENT_USER \ Software \ Microsoft \ Internet Explorer \ Main \ FeatureControl \ FEATURE_BROWSER_EMULATIon” the name of the application is specified with the value 11999.
    4) IE browser cache has been completely cleared
    5) The gmlib 1.5.5 component is installed, the old version has been removed.
    6) Development Environment Delphi 2007
    7) A new simple experimental project is created using the WebBrowser component, GMap, GMMarker.

    Revealed

    1) The map displayed in the WebBrowser component does not interact with the form either, for example, the EventMouse event does not display coordinates when you move the mouse over the map.
    2) Many layers are not displayed on the map. There is no layer of weather, transit
    3) Not displayed on the map, many visual properties do not have the zoom sliders, the arrow moves the map.
    4) No objects are drawn on the map after the map is initialized

    Conclusion: the map is displayed and it can be manipulated, but there is absolutely no interaction with the map.

    This problem became known on May 15, 2017. This date almost coincided with the mass virus attack “wanna cry”.

    What ways of solving the problem you can advise?

    Reply
  80. Shaun Hirst says:
    Saturday May 20th, 2017 at 07:42 AM

    Latest Version 1.5.5 fixed the showing of markers after googles update for me.

    Thanks

    Reply
  81. Sergey says:
    Monday May 22nd, 2017 at 07:20 AM

    Good day

    After deleting the links in the “library patch” and reinstalling the component everything worked.

    Thank you very much for your support.

    I would like to ask you in the future, if possible, to include in “gmlib” the support of other mapping engines.

    Reply
  82. Cleonir says:
    Tuesday May 23rd, 2017 at 05:50 PM

    Tem como pegar o nome do novo local quando arrastado o marcador do GMDirection?
    ou pegar a nova distancia depois de arrastado?

    Reply
  83. selahattin says:
    Wednesday June 21st, 2017 at 10:08 AM

    Hello,
    I am writing the following code, but only the latest rote seems, I want to see all the roots. Please help me.

    procedure TForm1.Button4Click(Sender: TObject);
    var
    i:integeR;
    begin
    GMMap1.DoMap;

    GMMarker1.Add;
    GMMarker1.Items[0].Position.Lat := 39.7589418925097;
    GMMarker1.Items[0].Position.Lng := 37.0511508733034;
    GMMarker1.Items[0].Title := ‘Orginal_Adress_0’;
    GMMarker1.Items[0].Draggable := true;
    GMMarker1.Items[0].Flat := true;

    GMMarker1.Add;
    GMMarker1.Items[1].Position.Lat := 39.7477962764368;
    GMMarker1.Items[1].Position.Lng := 37.0212382078171;
    GMMarker1.Items[1].Title := ‘Orginal_Adress_1’;
    GMMarker1.Items[1].Draggable := true;
    GMMarker1.Items[1].Flat := true;

    GMMarker1.Add;
    GMMarker1.Items[2].Position.Lat := 39.7488975147203;
    GMMarker1.Items[2].Position.Lng := 37.0168179273605;
    GMMarker1.Items[2].Title := ‘Orginal_Adress_2’;
    GMMarker1.Items[2].Draggable := true;
    GMMarker1.Items[2].Flat := true;

    GMMarker2.Add;
    GMMarker2.Items[0].Position.Lat := 39.7605073926379;
    GMMarker2.Items[0].Position.Lng := 37.0257704705;
    GMMarker2.Items[0].Title := ‘Destination_adress_0’;
    GMMarker2.Items[0].Draggable := true;
    GMMarker2.Items[0].Flat := true;

    GMMarker2.Add;
    GMMarker2.Items[1].Position.Lat := 39.744194444014;
    GMMarker2.Items[1].Position.Lng := 37.027212157845;
    GMMarker2.Items[1].Title := ‘Destination_adress_1’;
    GMMarker2.Items[1].Draggable := true;
    GMMarker2.Items[1].Flat := true;

    GMMarker2.Add;
    GMMarker2.Items[2].Position.Lat := 39.784194444014;
    GMMarker2.Items[2].Position.Lng := 37.027212157845;
    GMMarker2.Items[2].Title := ‘Destination_adress_2’;
    GMMarker2.Items[2].Draggable := true;
    GMMarker2.Items[2].Flat := true;

    for i := 0 to 2 do
    begin

    GMDirection1.DirectionsRequest.Origin.LatLng.Lat := GMMarker1.Items[i].Position.Lat;
    GMDirection1.DirectionsRequest.Origin.LatLng.Lng := GMMarker1.Items[i].Position.Lng;
    GMDirection1.DirectionsRequest.Destination.LatLng.Lat := GMMarker2.Items[i].Position.Lat;
    GMDirection1.DirectionsRequest.Destination.LatLng.Lng := GMMarker2.Items[i].Position.Lng;
    GMDirection1.Execute;
    ShowMessage(inttostr(i));

    end;

    end;

    Reply
  84. Mykola says:
    Thursday August 3rd, 2017 at 12:30 PM

    Hello. We use you component GMLib and have some qwestions.
    Our main problem is that we can’t free memory closing the form with GmLib+TWebBrowser while main program is runing. It’s looks like TWebBrowser bugs.
    We want to refuse from TWebBrowser and start to use TChromium. We download it from here https://github.com/hgourvest/dcef3 and installe. Then we set the following settings in gmlib.inc file,

    // delphi XE7
    {$IFDEF VER280}
    {$DEFINE DELPHIXE7}
    {.$DEFINE WEBBROWSER}
    {$IFDEF WIN32}
    {$DEFINE CHROMIUM}
    {.$DEFINE CHROMIUMFMX}
    {$ENDIF}
    {$ENDIF} .
    On compiling a project, it doesn’t understand some functions.
    For example TWebChromium.SaveToJPGFile (FileName: TFileName) there is no such procedure, and so on. Can you implement Tchromium in your component or мaybe suggest a solution for us. Thx a lot for response.

    Reply
  85. Flavius says:
    Wednesday October 25th, 2017 at 04:39 PM

    Hi!

    Where can I download latest version 1.5.5? On the download section I can only see versions up to 1.5.3

    Thanks a lot

    Reply
  86. Shaun Hirst says:
    Wednesday January 31st, 2018 at 08:02 PM

    Hi,

    I’m having issues using the map after loading i can briefly drag it but after that it stops responding to drags i’m also not able to click on the icons. to get there info. but i am able to zoom in and out.

    Thanks in advance for you help

    Reply
  87. Matthias says:
    Tuesday August 14th, 2018 at 11:22 AM

    Hello Cadetill,

    today the gmlib stopped working. After the doMap-Command the map is never rendered. The TWebBrowser.Exec returns OLECMDERR_E_UNKNOWNGROUP, and loops forever. I also tried using the gmlib on different computers. My knowledge in this
    topic is way too limited, hope you can shed some light on the problem and provide a fix.

    GmLib works too well to move to another component.
    Keep up the great work.

    Thanks in advance for you help.

    Reply
  88. Dan Pearce says:
    Tuesday August 14th, 2018 at 11:32 AM

    It is happening to everybody, we are trying to work out a fix. Google are no longer supporting the Javascript specified in map.html (ours is 3.27), see https://developers.google.com/maps/documentation/javascript/versions

    We have changed ours to 3.33, and removed the reference to specific version also. No dice. We hope to have fixed it very soon, and if we do, we will re-comment.

    Reply
  89. Dan Pearce says:
    Tuesday August 14th, 2018 at 02:30 PM

    Latest news: we still haven’t solved it, but

    procedure TFContractsViewer.GMMapAfterPageLoaded(Sender: TObject; First: Boolean);
    begin
    if First then
    GMMap.DoMap;
    GMMapPageLoaded := True;
    end;

    …DoMap (i.e. GMMapAfterPageLoaded) is now being called too early. DoMap crashes, and this causes the looping. We trapped DoMap in Delphi, saved the params, and added it as a script…

    script
    DoMap(52.189746,- 2.215933,’mtROADMAP’,10,false,true,true etc.
    script
    body
    html

    …at the end of map.html (so that it would run last). We commented out the GMMapAfterPageLoaded code, rebuilt and reran. It worked fine. Brackets etc. removed from code otherwise it won’t post.

    Not a permanent fix, but a clue to what is going on?

    Reply
  90. Dan Pearce says:
    Tuesday August 14th, 2018 at 03:53 PM

    This works

    https://stackoverflow.com/questions/51833246/gmlib-megademo-exe-wont-load

    You still need to alter the Javascript version in map.html

    Reply
  91. jose carlos sanita says:
    Thursday August 16th, 2018 at 04:10 PM

    Hi, could you send the fonts? vencetex@hotmail.com

    Reply
  92. Flavius says:
    Monday February 25th, 2019 at 02:24 PM

    Hello!

    Are you going to release GMLIB for the new Delphi 10.3 Community Edition? I tried loading GMLibProject_D_Seattle10.groupproj from GMLIB 1.5.3 but it won’t compile in Delphi 10.3 Community.

    There’s lots of buzz around this first free Delphi release, I was hoping GMLIB would follow. It would be a great loss not to be able to use GMLIB anymore. Great product btw!

    Thanks,
    Flavius

    Reply
  93. Flavius says:
    Monday February 25th, 2019 at 05:10 PM

    Hello!

    Are you going to release GMLIB for the new Delphi 10.3 Community Edition? I tried loading GMLibProject_D_Seattle10.groupproj from GMLIB 1.5.3 but it won’t compile in Delphi 10.3 Community.

    Thanks,
    Flavius

    Reply
  94. Flavius says:
    Monday February 25th, 2019 at 05:10 PM

    Hi, are you going to release GMLIB for the new Delphi 10.3 Community Edition? I tried loading GMLibProject_D_Seattle10.groupproj from GMLIB 1.5.3 but it won’t compile in Delphi 10.3 Community.

    Reply

Leave a Reply to cadetill Cancel reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)

This site uses Akismet to reduce spam. Learn how your comment data is processed.